Search
Kinematics of the rotary broaching process
| Authors: Lomakin A.V. | Published: 30.07.2013 |
| Published in issue: #2(611)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: polygonal holes, rotary broaching |
The Investigation of conditions to increase the precision of geometry of surfaces processed by different grain size and standard grinding wheels
| Authors: Gusejnov G.A., Bagirov S.A. | Published: 30.07.2013 |
| Published in issue: #3(612)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: Grinding, surface grinding, different grain size, empirical model, abrasive action, contact area, cutting force |
The Influence of cutting modes on chips shrinkage when turning WT6 titanium alloy
| Authors: Zhilyaev S.V., Kugultinov D.S. | Published: 30.07.2013 |
| Published in issue: #3(612)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: chip reduction coefficient, cutting mode, titanium alloys, experimental research |
Forming a Simplified Motion Path of a Bipedal Walking Robot
| Authors: Kovalchuk A.K., Kulakov D.B., Semenov S.E. | Published: 30.07.2013 |
| Published in issue: #3(612)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: bipedal walking robot, motion path, harmonic functions, motion control synthesis |
The rotor system with magnetic bearings based on high-temperature superconductors (HTS)
| Authors: Polushchenko O.L., Nizhelskii N.A., Sysoev M.A. | Published: 30.07.2013 |
| Published in issue: #3(612)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: superconducting bearing, high-temperature superconductors, HTS, permanent magnet, load capacity, stiffness |
Stabilization of movement of biped walking robot with torque on feet control
| Authors: Kovalchuk A.K. | Published: 30.07.2013 |
| Published in issue: #4(613)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: bipedal walking robot, motion trajectory, harmonic functions, motion control synthesis |
Minimization of technological cost price of hydroabrasive cutting taking into account cost and technological parameters of cutting
| Authors: Tarasov V.A., Galinovsky A.L., Elfimov V.M. | Published: 30.07.2013 |
| Published in issue: #4(613)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: hydroabrasive cutting, optimization, technological parameters, abrasive consumption, efficiency of technology |
The program of profiling helical grooves of end cutting tools
| Authors: Hisamutdinov R.M., Faskhutdinov A.I. | Published: 30.07.2013 |
| Published in issue: #4(613)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: cutting tool, helical groove, grinding wheel, profile |
The calculation of tool tip vibrations when turning superalloys
| Authors: Fadin D.M., Shuvaev A.V. | Published: 30.07.2013 |
| Published in issue: #4(613)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: nonlinear dynamic model, turning, vibrations, superalloys |
Choice and substantiation of optimal technology of helicopter blades manufacturing from composite materials
| Authors: Bohoeva L.A., Pnev A.G. | Published: 30.07.2013 |
| Published in issue: #5(614)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: technology, blade, structural components, press mold, silastic |