Search
The Experimental Study of Pumping Characteristics of the First Domestic Oil Free System Combining Roots and Scroll Vacuum Pumps
| Authors: Burmistrov A.V., Salikeev S.I. | Published: 07.09.2016 |
| Published in issue: #9(678)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: oil free vacuum, scroll pump, Roots pump, pumping speed, investigation test stand, pumping characteristics |
The Industry Standard for the Manometric Method of Leakage Testing
| Authors: Makarov V.A., Asadova Y.S., Tyutyaev R.E. | Published: 07.09.2016 |
| Published in issue: #9(678)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: automatic leakage testing, non-destructive testing, information technology |
The Analysis of the Possible Use of Low-Temperature Alloys as an Auxiliary Layer between the Piezoelectric Transducer and a Test Piece with Complex Geometry
| Authors: Remizov A.L., Deryabin A.A., Khalilov M.A. | Published: 07.09.2016 |
| Published in issue: #9(678)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: ultrasonic testing, layered medium, impedance, acoustic duct equation, test sensitivity |
Methods and Instruments for Measuring the Rate of Liquids and Gases: Prospects of Application of Ultrasonic Transducers with a Wide Measuring Beam
| Authors: Khlebnova V.I. | Published: 07.09.2016 |
| Published in issue: #9(678)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: orifice, turbine flow meter, vortex flow meter, ultrasonic flow meter, Lamb waves |
The Determination of Rational Application of Axial, Centripetal and Centrifugal Ultralow Power Turbines by their Generalized Characteristics
| Authors: Kalabukhov D.S. | Published: 07.09.2016 |
| Published in issue: #9(678)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: ultralow power turbine, operating parameters, generalized characteristic, coefficient of circumferential efficiency, coefficient of power efficiency, axial turbine, centripetal turbine, centrifugal turbine |
The Development of the Machine-Tool Dynamic Passport Based on Neural Network Modeling of its Working Space Using nVidia CUDA Technology and Deep Learning Approaches
| Authors: Kabaldin Y.G., Shatagin D.A., Laptev I.L., Sidorenkov D.A. | Published: 12.10.2016 |
| Published in issue: #10(679)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: metal cutting system, optimization of machining modes, modeling, neural networks, parallel calculations |
Frequency Methods for Calibrating Leak Detectors
| Authors: Makarov V.A., Asadova Y.S., Tyutyaev R.E. | Published: 12.10.2016 |
| Published in issue: #10(679)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: calibration, gas-analytical leak detector, manometric leak detector, leakage testing, throttling device |
Diagnostic Features in the Assessment of the Technical Condition of Machines and Mechanisms
| Authors: Pronyakin V.I. | Published: 12.10.2016 |
| Published in issue: #10(679)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: technical diagnostics, mechanical and electromechanical systems, diagnostic feature, defect, phase-chronometric method, cyclic mechanisms |
The Role and Significance of PDM Systems in the Development of Manufacturing Equipment
| Authors: Timofeev P.G., Yagopolskiy A.G. | Published: 12.10.2016 |
| Published in issue: #10(679)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: manufacturing equipment, design, life cycle, data management, project, designer, client, manufacturer, machine tool, common information space, CALS, PDM-system |
Multi-Criteria Management of the Life Cycle of Metal Cutting Process
| Authors: Gavryushin S.S., Dang H.M. | Published: 12.10.2016 |
| Published in issue: #10(679)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: multi-criteria management, multi-criteria optimization, product lifecycle, metal cutting process, turning, visual interactive analysis method |