Search
The Analysis of Technological Practices for Training Qualified Engineering Personnel
| Authors: Kravchenko I.I., Zavarzin V.I., Bushuev N.N., Smirnov S.G., Bushueva V.V. | Published: 24.11.2016 |
| Published in issue: #11(680)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: technological system, continuous research and production practices, basic enterprise, training and production passport, foreign experience in solving engineering problems |
An Experimental Method of Determining the Mechanism of Aerodynamic Noise Generation
| Authors: Smirnov S.G., Pankova E.O. | Published: 24.11.2016 |
| Published in issue: #11(680)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: power equipment, Roots blower, sound generation, acoustic emission, sound power level |
Torque Characteristics of Check Valves in Inclined Pipelines
| Authors: Prudnikov S.N., Shadrin V.S. | Published: 24.11.2016 |
| Published in issue: #11(680)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: torque, dynamic characteristics, pneumatic and hydraulic drive, hydraulic resistance |
The Classification of Abrasive Wheels by Topography of the Ground Surface of R9M4K8 Plates Using Cluster Analysis
| Authors: Soler Y.I., Van Canh Nguyen, Kazimirov D.Y. | Published: 24.11.2016 |
| Published in issue: #11(680)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: grinding, abrasive wheels, cluster analysis, classification, distance (metric), dendrogram, combining circuit |
The Characteristics of the Platform for Active Vibration Isolation Based on Magnetorheological Elastomers
| Authors: Mikhailov V.P., Tovmachenko D.K., Basinenkov A.M., Stepanov G.V. | Published: 16.12.2016 |
| Published in issue: #12(681)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: magnetorheological elastomer, active damper, vibration isolation, positioning error, transitional process |
Statistical Methods of Control of Technological Processes
| Authors: Timofeev G.A., Barbashov N.N., Terentyeva A.D. | Published: 16.12.2016 |
| Published in issue: #12(681)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: automation of technological processes, precision control, rational algorithm, moving average, adaptive control |
The Assessment of Cutting Ability of Nitride-Boron High Porous Wheels when Flat Grinding Steel 13Kh15N5AM3 Parts by Surface Macrogeometry Using Artificial Intelligence
| Authors: Soler Y.I., Nguen M.T., Mai D.S. | Published: 16.12.2016 |
| Published in issue: #12(681)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: grinding, flatness deviation, high porous wheels, fuzzy logic, neural network, activation function |
Instability of Cutting Depth when Grinding Gearwheel Teeth by Copying
| Authors: Rasulov N.M., Shabiev E.T. | Published: 16.12.2016 |
| Published in issue: #12(681)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: grinding, cutting depth, involute profile, abrasive wheel, copying method, allowance |
The Influence of Structural, Technological Parameters and Strain State on Anisotropy of Mechanical Properties of Sheet Porous Net Materials
| Authors: Tretyakov A.F. | Published: 16.12.2016 |
| Published in issue: #12(681)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: porous net materials, anisotropy of mechanical properties, woven wire mesh, reduction rate of mesh briquette, biaxial tension, averaged macroscopic failure stress, relative mesh lengthening, hydrostatic bulging |
The Control of Axial Elastic Deformations of Non-Rigid Bearing Rings when Flat Grinding End Surfaces
| Authors: Nosenko V.A., Tyshkevich V.N., Sarazov A.V., Orlov S.V. | Published: 27.01.2017 |
| Published in issue: #1(682)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: axial elastic deformations, bearing ring, grinding of end surfaces, quality of machined surface, process optimization |