Search
A Study of Thermal Deformation Cycles in the Process of Ultrasonic Cutting of Polymeric Materials
| Authors: Volkov S.S., Remizov A.L., Shestel L.A. | Published: 23.11.2017 |
| Published in issue: #11(692)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: ultrasonic cutting, static pressure, amplitude of waveguide oscillations, working face of the waveguide, thermal cycle, destruction of polymers |
A Stochastic Model of Abrasive Processing. The Kinematics of Flat Grinding
| Authors: Voronov S.A., Weidong Ma, Voronova I.S. | Published: 23.11.2017 |
| Published in issue: #11(692)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: flat grinding simulation, cutting process kinematics, random parameters, abrasive grains, geometry of machined surface, waviness |
Research into the Influence of Design and Technological Parameters on the Strength-to-Weight Ratio of Porous Net Materials
| Authors: Tretyakov A.F. | Published: 19.12.2017 |
| Published in issue: #12(693)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: porous net materials, metal mesh, pressure welding, strength-to-weight ratio, porosity, density |
Developing Systems for Automatic Control of the Process of Ultrasonic Welding of Plastic Materials
| Authors: Volkov S.S., Remizov A.L., Shestel L.A. | Published: 19.12.2017 |
| Published in issue: #12(693)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: ultrasonic welding, waveguide vibration amplitude, static pressure, fixed settling, control system, ultrasonic frequency |
The Bauschinger Effect for Various Types of Plastic Deformation
| Authors: Karatushin S.I., Khramova D.A., Pekhov V.A. | Published: 19.12.2017 |
| Published in issue: #12(693)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: Bauschinger effect, cyclic loading, tension, torsion, bending |
Automation of Decision-Making When Designing the Saw Unit of a Multirip Bench Using the Multiple-Criteria Approach
| Authors: Gavryushin S.S., Nguyen C.D., Dang H.M., Phung V.B. | Published: 19.12.2017 |
| Published in issue: #12(693)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: product lifecycle management (PLM), decision-making, multi-criteria design, visual interactive analysis method, saw unit, multirip bench |
The Effect of Thermal Energy Concentration on the Strength of Welded Surfaces in the Ultrasonic Welding of Plastics
| Authors: Volkov S.S., Nerovnyy V.M., Shestel L.A. | Published: 24.01.2018 |
| Published in issue: #1(694)/2018 | |
| Category: Technology and Process Machines | |
| Keywords: ultrasonic welding, sonotrode vibration amplitude, static welding pressure, concentration coefficient, specific power value, dynamic stresses |
Simulation of Contact Loads in the ANSYS Environment for Non-Involute Meshing
| Authors: Karatushin S.I., Khramova D.A., Bokuchava P.N. | Published: 21.02.2018 |
| Published in issue: #2(695)/2018 | |
| Category: Technology and Process Machines | |
| Keywords: contact stresses, stress-strain state, cycloid gearbox, eccentric-cycloid gearing, worm gearbox, ANSYS |
Research into the Possibility of Improving Properties of Carbon Fibers at Compression and Shear by Stitching Carbon Preforms with Aramid Threads
| Authors: Mikheev P.V., Gusev S.A., Belokopytova K.E., Ageyeva T.G., Malyshev A.N. | Published: 02.04.2018 |
| Published in issue: #3(696)/2018 | |
| Category: Technology and Process Machines | |
| Keywords: carbon fiber reinforced polymer, stitching of dry performs, aramid fibers, strength at compression, strength at shift, impregnation by resin |
Developing a Technical Solution for a Cooling Device for the Cutting Zone of a Milling Machine Using Search Engineering
| Authors: Yakovlev А.А., Krylov Е.G., Sorokin V.S. | Published: 02.04.2018 |
| Published in issue: #3(696)/2018 | |
| Category: Technology and Process Machines | |
| Keywords: search design, physical principle of operation, technical solution, technical system, cooling device, cutting zone |