Search
Workspaces of Parallel Mechanisms and Methods of Determining Their Shape and Size
| Authors: Erastova K.G., Laryushkin P.A. | Published: 10.08.2017 |
| Published in issue: #8(689)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: parallel mechanism, workspace, planar mechanisms, spatial mechanism, mechanism synthesis |
Strengthening of Cylindrical Bushings by Transverse Burnishing with Flat Plates
| Authors: Zaides S.A., Pham Dac Phuong | Published: 05.09.2017 |
| Published in issue: #9(690)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: strengthening of bushings, transverse burnishing, percentage reduction, stress-strain state, plastic deformation, wall thickness |
High Efficiency Eddy Current Testing of Tubes with Flow Coating
| Authors: Klyuev V.V., Efimov, Shubochkin A.E., Martyanov E.V., Mefodichev P.N. | Published: 05.09.2017 |
| Published in issue: #9(690)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: non-destructive testing, eddy current testing of tubes, eddy current defectoscope, local hardening zone, hardness control |
Modelling the Cut Layer When Thread Milling
| Authors: Malkov O.V., Karelskiy A.S. | Published: 05.09.2017 |
| Published in issue: #9(690)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: thread milling model, machining of internal threads, cross section of the cut layer, engagement angle, thread milling simulation |
Technological Principles of Increasing Wear Resistance of Parts by Electromechanical Surface Hardening
| Authors: Fedorova L.V., Fedorov S.K., Ivanova Y.S., Lompas A.M. | Published: 06.09.2017 |
| Published in issue: #9(690)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: tool joint hardening, electromechanical surface hardening, wear resistance of rubbing surfaces, electromechanical treatment, surface layer hardness |
Uncompensated Transformation of Matter from Liquid to Solid State During Solidification of Metals and Alloys
| Authors: Semenov V.I. | Published: 06.09.2017 |
| Published in issue: #9(690)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: solidification metal and alloy, equilibrium co-existence of phases, transformation order, metastable melt structure, irreversible process, chemical potential |
The Research of Surface Roughness Parameters and Accuracy of Additive Manufacturing
| Authors: Sukhov D.I., Nerush S.V., Belyakov S.V., Mazalov P.B. | Published: 07.09.2017 |
| Published in issue: #9(690)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: surface roughness, selective laser melting, surface quality, additive manufacturing, nickel super alloy, metal powder composition |
A Universal Test Facility for Determining Tribotechnical Characteristics of Lubricants Based on the Serial Friction Machine SMTs-2
| Authors: Kharchenko M.V., Dema R.R., Nefediev S.P., Osipova O.A. | Published: 24.10.2017 |
| Published in issue: #10(691)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: friction machine, lubricant, test methods, wear, antifriction properties, extreme pressure properties |
Optimization of the Conveyor Drive Parameters under Stochastic Loads
| Authors: Kuleshov M.V., Syromyatnikov V.S. | Published: 24.10.2017 |
| Published in issue: #10(691)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: drive design, belt conveyor, computer simulation, GPSS World, statistical analysis |
A Tool for Distributed Design in Mechanical Engineering and Instrumentation
| Authors: Belov V.F., Yakuba V.V. | Published: 23.11.2017 |
| Published in issue: #11(692)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: CAD system, distributed design, system architecture engineering, test engineering, CAD/CAM NX, PLM Teamcenter |