Search
Prediction of accuracy in cutting
| Authors: Kondrashov A.G., Safarov D.T. | Published: 19.11.2014 |
| Published in issue: #12(657)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: cutting, geometric accuracy, process modules, coordinate system, reference point. |
Improving the design of a dual-chamber device for gas forming
| Authors: Botashev A.Y., Musaev A.A. | Published: 19.11.2014 |
| Published in issue: #12(657)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: dual-chamber device, compression, fuel mixture, formed blank, optimization, and gas pressure. |
Efficiency control methods for air conditioning systems with heat pumps
| Authors: Protopopov K.V., Zhirebnyy I.P., Garanov S.A. | Published: 19.11.2014 |
| Published in issue: #12(657)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: heat pump, zeotropic refrigerant, heating efficiency, composition of a mixture. |
Sensitivity of internal disturbances of a panel structure comprising a rotor to variations of lumped masses
| Authors: Arinchev S.V., Rachkin D.A. | Published: 12.01.2015 |
| Published in issue: #1(658)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: internal disturbances, forced vibrations, rotor, lumped mass, sensitivity |
Deformation of working elements of dry scroll vacuum pumps
| Authors: Raykov A.A., Yakupov R.R., Burmistrov A.V., Salikeev S.I. | Published: 12.01.2015 |
| Published in issue: #1(658)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: friction system, amplitude and phase response, prediction, physical and mathematical modeling |
Actual problems of modern tribotechnology and ways of solution
| Authors: Shapovalov V.V., Sladkowski A., Erkenov A.Ch. | Published: 12.01.2015 |
| Published in issue: #1(658)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: friction system, amplitude and phase response, prediction, physical and mathematical modeling |
The bases of angular velocity plans for three-degree-of-freedom planetary automatic transmissions with eight forward gears
| Authors: Kharitonov S.A., Nagaytsev M.V. | Published: 12.01.2015 |
| Published in issue: #1(658)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: angular velocity plan, planetary gear set, kinematic scheme, gearbox |
Comparative analysis of power schemes of wave stepper pneumatic motors and slider-crank mechanisms used as actuators in piston engines
| Authors: Klenikov S.S., Klenikova V.A. | Published: 02.02.2015 |
| Published in issue: #2(659)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: wave stepper pneumatic motor, piston, shaft, flexible wheel, rigid wheel, slider crank mechanism, multiplier |
The bases of angular velocity plans for three-degree-of-freedom planetary automatic transmissions with nine and ten forward gears
| Authors: Kharitonov S.A., Nagaytsev M.V. | Published: 02.02.2015 |
| Published in issue: #2(659)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: angular velocity plan, planetary gear set, kinematic scheme, gearbox |
Dynamic characteristics of pneumatic actuators of automatic and remote control systems
| Authors: Prudnikov S.N., Podchufarov A.A. | Published: 02.02.2015 |
| Published in issue: #2(659)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: pneumatic actuator, throttle valve, shutter, positioner, actuator, overlapping device |