Search
Application of Panoramic Speckle Interferometry for Testing Prismatic Porous Samples for Uniaxial Compression
| Authors: Goldshtein R.V., Kozintsev V.M., Osipenko N.M., Popov A.L., Chelubeev D.A. | Published: 08.04.2016 |
| Published in issue: #4(673)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: panoramic speckle interferometry, sample, parallelepiped, gypsum, uniaxial compression, lateral faces, normal displacement |
Modeling of Burns When Grinding Hardened 30KhGSA Steel Parts
| Authors: Soler Y.I., Nguyen Van Le, Kazimirov D.Y. | Published: 08.04.2016 |
| Published in issue: #4(673)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: modeling, grinding, burns, microhardness, digital technology, response surface |
Geometry Analysis of Oblique Boring by Radius Peakless Cutters in Static and Kinematic Systems of Coordinates
| Authors: Filippov A.V., Walter A.V., Shamarin N.N., Podgornykh O.A., Chazov P.A. | Published: 08.04.2016 |
| Published in issue: #4(673)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: boring, coordinate systems, peakless cutter, cutting edge geometry |
Sensitivity of Forced Vibrations of the Frame with an Unbalanced Rotor to the Variations of Bracing Stiffness
| Authors: Arinchev S.V., Fedyushkin A.S. | Published: 08.04.2016 |
| Published in issue: #4(673)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: rotor imbalance, elastic frame, forced vibration sensitivity, bracing stiffness |
The Study of Deformation and Failure Processes in the Cut Layer of Material Based on the Atomic Approach
| Authors: Kabaldin Y.G., Kuzmishina A.M. | Published: 11.05.2016 |
| Published in issue: #5(674)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: atomic structure of metals, dislocation, cutting, deformation, shear strength, impurity, atomic approach |
The Relationship between Components of the Cutting Power and the Instantaneous Cutting Capacity when Creep-Feed Grinding the Titanium Alloy with Continuous Dressing of Abrasive Tools
| Authors: Nosenko V.A., Nosenko V.A., Lyasin D.N., Kremenetsky L.L. | Published: 11.05.2016 |
| Published in issue: #5(674)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: titanium alloy, creep-feed grinding, components of cutting force, continuous dressing, mathematic modeling, instantaneous cutting capacity, step-by-step animation |
Analysis of Bevel Gears Using ANSYS Software Package
| Authors: Karatushin S.I., Pleschanova Y.A., Bildyuk N.A., Bokuchava P.N. | Published: 11.05.2016 |
| Published in issue: #5(674)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: bevel gears, stress-strain state, cementation, residual stresses, contact status, ANSYS |
Technological Reserves of Improving Grinding Quality of High Speed Steel Plates with Improved Productivity
| Authors: Soler Y.I., Van Canh Nguyen | Published: 11.05.2016 |
| Published in issue: #5(674)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: grinding, sparking-out, measure of position, mean, median, measure of dispersion, process stability, sintercorundum wheels, chromous |
On the Assessment of Measurement Results and Their Interpretation to Obtain Information on the Operation of Machines and Mechanisms
| Authors: Pronyakin V.I. | Published: 11.05.2016 |
| Published in issue: #5(674)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: phase-chronometric method, precision time measurement, information and metrological support, technical diagnostics, mathematical modeling, defect |
Hardware and Software Provisions for Studying the Condition of Lathes by Parameters of the Support Unit Movement Paths
| Authors: Yagopolskiy A.G., Kropotin N.J. | Published: 11.05.2016 |
| Published in issue: #5(674)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: lathe, experimental research, forecasting, support unit, path parameters of movements, hardware and software |