Search
Estimation of axial force in turbocharger thrust bearing design optimization
| Authors: Hudyakov V.S., Zadorozhnaya E.A. | Published: 13.01.2026 |
| Published in issue: #1(790)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: thrust bearing, axial force, turbocharger, hydromechanical characteristics |
The effect of residual stresses on elastic deformations of low-stiffness parts during grinding
| Authors: Tyshkevich V.N., Nosenko V.A., Sarazov A.V., Orlov S.V., Kiselev E.S., Unyanin A.N. | Published: 14.01.2026 |
| Published in issue: #1(790)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: elastic deformations, residual stress, small rigidity, flat grinding |
Parameters of the mathematical model for calculating numerically the flow in the flow path of a centrifugal pump with account for side slots
| Authors: Svoboda D.G., Zhuravkov A.V., Shchur V.A., Blinkovsky A.M., Klyuyev A.S. | Published: 15.01.2026 |
| Published in issue: #1(790)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: centrifugal pump, flow part, impeller, side slots, boundary conditions, integral parameters |
Determination of the geometric parameters of a rotary roller to improve the stress-strain state of hardened parts
| Authors: Zaides S.A., Ta V.T.T., Nikolaeva E.P. | Published: 16.01.2026 |
| Published in issue: #1(790)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: rotational roller, residual stresses, transient stresses, depth of plastic deformation, finite element method, cylindrical parts |
Development and Experimental Study of a New High-Efficiency Diaphragm Hydraulic Diode
| Authors: Shcherba V.E., Kaigorodov S.Y., Dorofeev E.A., Pavlyuchenko E.A., Sokirko K.N. | Published: 19.01.2026 |
| Published in issue: #1(790)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: diaphragm hydraulic diode, diodicity, asymmetric configuration of plates, experimental research, labyrinthine flow path, passive flow control |
Analysis of the kinematics of the process of hardening cylindrical parts with a helicoid tool
| Authors: Zaides S.A., Quang Khai Vu | Published: 03.02.2026 |
| Published in issue: #2(791)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: surface plastic deformation, helicoid working tool, kinematics of the hardening process, surface layer, cylindrical part |
Changing the performance of the fixed pad thrust bearing during the centrifugal compressor surge
| Authors: Sokolov N.V., Fedotov P.E. | Published: 05.02.2026 |
| Published in issue: #2(791)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: centrifugal compressor, surge, thrust bearing, direct problem, bearing capacity, hydrodynamic pressure |
Features of the use of hemispherical end mills when processing high-hardness layers of material of workpieces
| Authors: Mokritskiy B.Y., Kosmynin A.V., Mariin S.B. | Published: 06.02.2026 |
| Published in issue: #2(791)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: milling of high-hardness materials, the period of durability of milling cutters, hemispherical end mills |
Ensuring the surface quality of anisotropic crystals by applying oscillating movements
| Authors: Obraztsov A.E., Utenkov V.M., Kuznetsov P.M. | Published: 09.02.2026 |
| Published in issue: #2(791)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: KDP single crystal, using oscillating movements, vibration cutting, magnetorheological finishing |
Improving the efficiency of manufacturing parts in small-scale production through the use of additive technologies
| Authors: Shchelkunov E.B., Shchelkunov E.B., Akulina A.A., Ruban E.A. | Published: 09.02.2026 |
| Published in issue: #2(791)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: additive technologies, selective laser melting, blank of the Rocking Chair part, technological process |