Search
Evaluation of the influence of non-stationarity of liquid flow in the distribution units of a spur rotary pump on its operating efficiency
| Authors: Shcherba V.E., Kaigorodov S.Y., Dorofeev E.A., Sokirko K.N., Pavlyuchenko E.A. | Published: 13.02.2026 |
| Published in issue: #2(791)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: rotary spur pump, dynamic distributor, diaphragm hydraulic diode, unsteady flow, volumetric efficiency |
Self-braking gears based on the 2K-H planetary scheme
| Authors: Timofeev G.A. | Published: 19.02.2026 |
| Published in issue: #2(791)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: planetary gears with double-ring outer satellites, self-braking condition, forces in the gearing, forward efficiency, gear geometry |
ANFIS Adaptive Neuro-fuzzy Inference System for six-degree-of-freedom kinematics with prismatic joint
| Authors: Alwardat M.Y., Hassan M. Alwan | Published: 19.02.2026 |
| Published in issue: #2(791)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Robots, Mechatronics and Robotic Systems | |
| Keywords: ANFIS, accumulation error, inverse kinematics problem, MATLAB, robotic manipulator |
Method for adjusting gas-dynamic characteristics of centrifugal compressors taking into account changes in the technical condition of the flow path
| Authors: Vanyashov A.D., Bychkov D.V. | Published: 19.02.2026 |
| Published in issue: #3(792)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: centrifugal compressor, gas dynamic characteristic, hydrogen-containing gas, flow part |
Institute of Applied Mathematics and Automation, Branch of the Kabardino-Balkarian Scientific Center of the Russian Academy of Sciences
| Authors: Rekhviashvili S.Sh. | Published: 20.02.2026 |
| Published in issue: #3(792)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Methods and Devices for Monitoring and Diagnosing Materials, Products, Substances | |
| Keywords: testing machine, drilling method, heating during drilling, simulation model, thermal balance, numerical simulation |
Analysis of the influence of the choice of refrigerating agent on the energy characteristics of a rotary-plate compressor operating in the field of wet steam of an air conditioning system
| Authors: Sadvakasov D.Kh., Raykovskiy N.A., Chernov G.I., Zhukova E.A., Zhukov A.O. | Published: 03.03.2026 |
| Published in issue: #3(792)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: refrigerant, wet steam, rotary-plate compressor, refrigeration cycle, flow coefficient, cooling capacity |
Analysis of the thermodynamic efficiency of using compressed gas to organize fluid movement in a positive displacement piston hybrid energy machine with two suction valves
| Authors: Shcherba V.E., Ekimov G.I. | Published: 03.03.2026 |
| Published in issue: #3(792)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: piston hybrid power machine, intensification of the cooling process, coolant, piston, cylinder, energy consumption for gas compression |
Ultrajet abrasive diagnostics of bimetallic agricultural machinery
| Authors: Yanko M.A., Galinovsky A.L., Boldyrev V.S., Abashin M.I. | Published: 10.03.2026 |
| Published in issue: #3(792)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: bimetallic agricultural machinery, self-sharpening tool of tillage tool, wear resistance, abrasive wear, agricultural implements |
Effect of pressure pulse shape on power density and laser spot size in laser shock peening of titanium alloy samples
| Authors: Shiryaev А.А., Milenin A.S., Plehov О.А., Vshivkov А.N., Gachegova Е.А. | Published: 12.03.2026 |
| Published in issue: #3(792)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: laser shock peening, elastic-plastic wave, titanium alloy sample, pressure pulse profile |
Three-link centroid mechanism as a non-free system of forming points
| Authors: Volkov G.Yu., Alekseeva Yu.V. | Published: 14.03.2026 |
| Published in issue: #3(792)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: analytical mechanics, centroid mechanisms, non-circular gears, Aronhold-Kennedy theorem, planetary hydraulic machine. |