Search
Hydrodiode control of liquid supply in a straight-tooth rotary pump
| Authors: Pavlyuchenko E.A., Kaigorodov S.Y., Pavlyuchenko A.S. | Published: 15.06.2026 |
| Published in issue: #6(795)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: hydrodiode regulation, adjustable vortex hydraulic diode, diode, straight-tooth rotary pump |
Linearization of the static negative compliance function of a hydrostatic thrust bearing with an elastic flow regulator
| Authors: Kodnyanko V.A., Grigorieva O.A., Strok L.V., Krekhova A.V. | Published: 16.06.2026 |
| Published in issue: #6(795)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: hydrostatic bearing, negative compliance, linearization of load characteristic, elastic flow regulator |
The movement of the piston in the cylinder of rotation with an infinite smallness of influence of the sheared for motion of the connecting rod
| Authors: Chigrik N.N. | Published: 18.06.2026 |
| Published in issue: #6(795)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Methods and Devices for Monitoring and Diagnosing Materials, Products, Substances | |
| Keywords: size of the maximum of the material, the uncertainty of the average clearance and interference, selective assembly, helical movement of the piston, operational clearance, the skew of the piston |
Modeling of periodic compressor operation and prospects for their development
| Authors: Busarov S.S. | Published: 07.07.2026 |
| Published in issue: #7(796)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: piston compressor, mathematical model, suction temperature, average discharge pressure, mobile compressor station, equipment layout |
Modularity and scalable integration as the basis for accelerated automation
| Authors: Stesin S.B., Akhmedov R.B. | Published: 13.07.2026 |
| Published in issue: #7(796)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Robots, Mechatronics and Robotic Systems | |
| Keywords: industrial robotics, CPG/FMCG, systems integration, Robotics-as-a-Service, accelerated automation, labour shortage |
The Problem of Erosive Wear in Turbomachinery
| Authors: Ibragimov V.E. | Published: 13.07.2026 |
| Published in issue: #7(796)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: centrifugal compressor, turbomachinery, blade erosion wear, erosion mathematical model, gas-dynamic modeling erosive wear |
Gripping Force Analysis for the Flat Module of a Parallel Relative Manipulation Mechanism
| Authors: Ispolov E.M., Laryushkin P.A., Medovshchikov A.V., Sinitsyna Y.V., Martynov D.S. | Published: 14.07.2026 |
| Published in issue: #7(796)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: parallel mechanisms, relative manipulation, force analysis, kinematic redundancy |
Sensitivity assessment of the time-of-flight diffraction method of ultrasonic testing
| Authors: Mogilner L.Yu., Shchipakov N.A., Gurkin S.V., Fomina L.P., Vorykhanov A.V. | Published: 15.07.2026 |
| Published in issue: #7(796)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Methods and Devices for Monitoring and Diagnosing Materials, Products, Substances | |
| Keywords: weld, ultrasonic testing, diffraction-time method, metallographic analysis, single volumetric defect, non-metallic inclusions |
Effect of low-plasticity burnishing on hardness, roughness and residual stresses of nickel alloy samples
| Authors: Shiryaev А.А., Karmanov V.V., Mordvin M.A. | Published: 17.07.2026 |
| Published in issue: #7(796)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: surface hardness, low-plastic burnishing, surface layer strengthening, surface roughness, residual stresses, angle of inclination |
Visually about redundant connections in mechanisms
| Authors: Ermak V.N. | Published: 20.07.2026 |
| Published in issue: #7(796)/2026 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: connections of kinematic pairs, connections of mechanism, redundant connections, equation of mobility and connections of mechanism, simple kinematic chains |