Search
Computing main elements of a cyclone-type desender flow part using the local multiphase separation coefficient
| Authors: Trulev A.V., Timushev S.F., Lomakin A.V., Klipov A.V., Zhukova T.V., Kagirov R.A. | Published: 17.07.2025 |
| Published in issue: #7(784)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: cyclone desender, mechanical impurities, flow part, fixed screw, multiphase coefficient, multiphase mixture |
Studying the stress-strain state of a vehicle cardan shaft with the removable hinges
| Authors: Platonov A.V., Shchegletov K.A., Ryabikina T.V. | Published: 18.07.2025 |
| Published in issue: #7(784)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: cardan shaft, cardan shaft hinge, cardan shaft crosspiece, removable hinge, numerical simulation, linear displacements |
Institute of mechanics and seismic stability of structures named after. M.T. Urazbaev Uzbekistan Academy of Sciences
| Authors: Annakulova G.K., Saidov S.A. | Published: 18.07.2025 |
| Published in issue: #7(784)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: hydraulic distributor, hydraulic distributor stabilization, slide valve, hydraulic cylinder piston, dynamic programming |
Influence of laser shock peening parameters on the distribution of residual stresses in the edge of a titanium alloy compressor blade
| Authors: Shiryaev А.А., Milenin A.S. | Published: 03.08.2025 |
| Published in issue: #8(785)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: laser shock peening, titanium alloy, residual stresses, blade edge, machining strategy |
Inverse kinematics of a 6-DOF hybrid robot including two parallel modules
| Authors: Mukhin К.S., Antonov A.V., Fomin A.S. | Published: 13.08.2025 |
| Published in issue: #8(785)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: hybrid design robot, inverse kinematics problem, 4-DOF delta mechanism, circular guide mechanism, trajectory simulation |
Influence of the ultrasonic welding mode parameters on strength characteristics of the bonded fabric
| Authors: Volkov S.S., Sudarev A.V., Pankratov A.S., Kobernik N.V. | Published: 13.08.2025 |
| Published in issue: #8(785)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: ultrasonic welding, nonwoven fabric, waveguide oscillation amplitude, static welding pressure, welded joints, fibrous canvas |
Robotic system control in a product femtosecond laser micro-processing
| Authors: Chkalov R.V., Kochuev D.A., Chernikov A.S., Khorkov K.S. | Published: 14.08.2025 |
| Published in issue: #8(785)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Robots, Mechatronics and Robotic Systems | |
| Keywords: femtosecond laser micro-processing, laser robotic system, operational mode monitoring, hardware and software |
Development of a method for accelerated assessment of the relative gain in the input technical work in the compression process and the polytropic index of the final parameters in a piston compressor with a two-phase working fluid
| Authors: Shcherba V.E., Kuzhbanov A.K., Gildebrandt M.I., Kudentsov V.Y., Galdin N.S., Gladenko A.A. | Published: 14.08.2025 |
| Published in issue: #8(785)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
| Keywords: piston compressor, coolant injection, technical operation gain, compression polytrophic index, interpolation polynomials |
Study of a hybrid manipulator with five degrees of freedom for the technological operations
| Authors: Rashoyan E.G., Aleshin A.K., Rashoyan G.V. | Published: 15.08.2025 |
| Published in issue: #8(785)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: hybrid manipulator, kinematic analysis, inverse positioning problem, working area, 4-RRR structure |
Development of special technology and technological equipment for the turbopump assembly turbine blades manufacture using the electrochemical method
| Authors: Ryazantsev A.Yu., Yukhnevich S.S., Podshibyakina V.A., Ustinov K.A., Lomakin I.V. | Published: 15.08.2025 |
| Published in issue: #8(785)/2025 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: turbopump assembly, turbine, electrochemistry, isostatic pressing |